Joint-It Simple is a ready-mixed, permeable, jointing compound that can be applied in all weathers. Joint-It Simple can be applied to Concrete Paving Slabs, Cobbles, and Natural Stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. Joint-It Simple is available in 3 paving-friendly colours. LIGHT GREY DARK GREY NATURAL / BUFF Basic Information Coverage Please look at the Joint It website for a product calculator as it will vary with how wide and deep the joints are Application Time At +15 degrees, Joint-It Simple will take approximately 30 minutes to apply. Lower temperatures will result in slower hardening and higher temperatures will result in quicker hardening. Once Opened Joint-It Simple must be used within four hours of opening the tub. Below 0 degrees If the temperature is forecast to drop below 0 degrees within 12 hours of application, we recommend you postpone application until the weather is a bit warmer. Ready-to-walk-on Surface can be walked on approximately 24 hours after application at temperatures of approx. 20 degrees. Power-washing Keep pressure washers away from paving for at least 28 days after application. If you need to power-wash the area, keep the nozzle 30cm away from paving. Storage Store Joint-It Simple in a cool, dry place. Protect tub from punctures or piercing. Any exposure to air will start to harden the product. Shelf-Life Joint-It Simple has a minimum shelf-life of 12 months when stored in unopened containers, as specified above.
Enter the content to use inside the accordion panel selected.